User guide

ADSL2+ 4-Port Ethernet USB Wireless-G Router - User Guide
4.5.15 TR-069
TR-069 is CPE Management Protocol from WAN side, intended for communication between a
CPE and Auto-Configuration Server (ACS). The CPE WAN Management Protocol defines a
mechanism that encompasses secure auto-configuration of a CPE, and also incorporates other
CPE management functions into a common framework.
The CPE WAN Management Protocol is intended to support a variety of functionalities to
manage a collection of CPE, including the following primary capabilities:
• Auto-configuration and dynamic service provisioning
• Software/firmware image management
• Status and performance monitoring
• Diagnostics
Figure 1-27 shows the default TR-069 page, which is accessed by clicking the TR-069 link on
the Advanced page. The TR-069 page allows you to set up connection parameters and may not
be seen by the end user.
Figure 1-27 : TR-069
Follow the procedure below to configure parameters related to TR-069.
1. Leave the default URL in the ACS URL field.
2. Check Periodic Inform Enabled and enter a value in the Periodic Inform Interval field.
OR
Page 37 of 87