User guide

ADSL2+ 4-Port Ethernet USB Wireless-G Router - User Guide
4.5.29 Policy Routing Configuration
The Policy Routing Configuration page is accessed by selecting Policy Routing Configuration on
the Advanced home page under QoS. This page enables you to configure policy routing and
QoS. The policy routing configuration is discussed as follows. The QoS configuration is
discussed in ‘‘Ingress Payload Database Configuration’’.
Figure 1-48 : Policy Routing Configuration
Field Definition/ Description
Ingress Interface The incoming traffic interface for a Policy Routing rule. Selections
include LAN interfaces, WAN interfaces, Locally generated (traffic),
and not applicable. Examples of Locally generated traffic are: voice
packets, packets generated by applications such as DNS, DHCP, etc.
Destination Interface The outgoing traffic interfaces for a Policy Routing rule. Selections
include LAN Interfaces and WAN interfaces.
DiffServ Code Point The diffServ code point (DSCP) field value ranges from 1 to 255.
This field cannot be configured alone, addtional fields like IP,
Source MAC, and/or Ingress Interface should be configured.
Class of Service The selections are (in the order of priority): CoS1, CoS2, CoS3,
CoS4, CoS5, CoS6, and N/A.
Source IP The IP address of the traffic source.
Mask The source IP netmask. This field is required if the source IP has
Page 61 of 87