User guide

ADSL2+ Ethernet USB Combo Router - User Guide
Page 28 of 67
4.5.8 Application (UPnP)
UPnP, NAT and Firewall Traversal allow traffic to pass-thru the ADSL Router for applications
using the UPnP protocol. This feature requires one active DSL connection. In presence of
multiple DSL connections, select the one over, which the incoming traffic will be present, for
example the default Internet connection.
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is
configured, click Advanced and under Application, select UPnP. You must enable UPnP and
then select which connection will utilize UPnP. See Figure 1-19.
Figure 1-19 : UPnP