User guide

ADSL2+ Ethernet USB Combo Router - User Guide
Page 42 of 67
4.5.18.3
Egress Layer 3 Configuration
The Egress Layer 3 page enables you to map CoS to ToS so that the priority marking of outgoing
packets can be carried over to the IP network.
Figure 1-30 : Egress Layer 3
Field Definition/ Description
Interface Select the WAN/LAN interface here to configure the QoS for
outgoing traffic to the IP network.
Default Non-IP Locally generated packets (such as ARP packets) do not have a CoS
marking. You can define the CoS for all unclassified outgoing
packets on layer 3 using this field. The selections are in the order of
descending priority): CoS1, CoS2, CoS3, CoS4, CoS5, and CoS6.
The default value is CoS1 (recommended).
Class of Service The selections are (in the order of descending priority): CoS1, CoS2,
CoS3, CoS4, CoS5, and CoS6.
Translated ToS The Type of Service field takes values from 1 to 255. The selections
are 0, 1, 2, 3, 4, 5, 6, 7.