User guide

ADSL2+ Ethernet USB Combo Router - User Guide
Page 54 of 67
Destination IP The IP address of the traffic destination.
Mask The netmask of the destination. This field is required if the
destination IP has been entered.
Protocol The selections are TCP, UDP, ICMP, Specify, and none. If you
choose Specify, you need to enter the protocol number in the box
next to the Protocol field.
This field cannot be configured alone, addtional fields like IP,
Source MAC, and/or Ingress Interface should be configured.
This field is also required if the source port or destination port has
been entered.
Source Port The source protocol port. You cannot configure this field without
entering the protocol first.
Destination Port The destination protocol port or port range. You cannot configure
this field without entering the protocol first.
Source MAC The MAC address of the traffic source.
Local Routing MAC This field is enabled only when Locally Generated is selected in the
Ingress Interface field. The mark for DNS traffic generated by
different applications are described below:
• Dynamic DNS: 0xE1
• Dynamic Proxy: 0xE2
• Web Server: 0xE3
• MSNTP: 0xE4
• DHCP Server: 0xE5
• IPtables Utility: 0xE6
• PPP Deamon: 0xE7
• IP Route: 0xE8
• ATM Library: 0xE9
• NET Tools: 0xEA
• RIP: 0xEB
• RIP v2: 0xEC
• UPNP: 0xEE