User guide

ADSL2+ Ethernet USB Combo Router - User Guide
Page 55 of 67
• Busybox Utility: 0xEF
• Configuration Manager: 0xF0
• DropBear Utility: 0xF1
• Voice: 0
Currently routing algorithms make decision based on destination address, i.e. only Destination IP
address and subnet mask is supported. The Policy Routing page enables you to route packets on
the basis of various fields in the packet. The following fields can be configured for Policy
Routing:
• Destination IP address/mask
•
Source IP address/mask
• Source MAC address
• Protocol (TCP, UDP, ICMP, etc)
•
Source port
• Destination port
• Incoming interface
• DSCP