User manual

User Manual
Page 25 of 57
If the default settings are not suitable for your configuration, they can be easily changed by
selecting the Manual radio button.
You should note that if you are using this router to connect using mobile broadband only (no
ADSL or Eth WAN connection, it is a good idea to disable the Auto WAN fail over function.
This is accessed by way of the Auto Wan Fail over tab on the Network page
ADSL
Your router is configured by default to connect using the Telkom Guest account. This is set
up on PVC0, and will allow the basic connectivity required to test your connection. This
allows access to most parts of the Telkom website. In order to have full internet access, you
will need to enter your own Username and Password. This is typically done using the Wizard
as described above, but can also be changed by selecting the ADSL radio button on the
Internet tab on the Network page.