User manual

User Manual
Page 41 of 57
IP/MAC Filtering
The router supports IP/MAC Filtering, which allows you to easily set up rules to control
incoming and outgoing Internet traffic. Choose IP/MAC from the Rule Type drop down box
to configure IP/MAC Filtering.
IP Filter Rule Index Select a suitable index for the filter rule.
Interface Select the WAN interface that you wish the filter rule to be active on.
Direction Select the direction that the filter rule will filter traffic in – Incoming,
Outgoing or Both.
Rule Type Select whether you will be filtering on IP or MAC. If you select MAC,
then all you will need to do is enter the MAC address of the device to be blocked, and
the day/time that the blocking must start and stop. If you select to filter on IP you will
need to fill in the following:
Source IP Address/Subnet Mask Enter the IP address of the PC on the LAN to
block.
Source Port Enter the port number used by the application to block.