User manual

User Manual
Page 42 of 57
Destination IP Address/Subnet Mask Enter the IP address of the remote server to
which connection should be blocked.
Destination Port Enter the destination port number used by the application to block.
Protocol Select the IP protocol to block.
You can also select a time schedule should you wish this to be a time –conditional
rule.
Day Click to select the days on which to apply the restriction.
Time Start (Blocking Time) (hh:mm) Enter the time when the restriction will be
enabled (00:00 to 23:59).
Time End (Blocking Time) (hh:mm) Enter the time when the restriction will be
disabled (00:00 to 23:59).
Click Add Rule to save the settings. The new rule will then be displayed in the
Outgoing IP Filtering table list.
Click Delete button to delete a corresponding rule.
Application Filter
Application Filter provides control on popular applications to be allowed or denied access to
local clients. Check the box of applications that you want to allow to be accessed by local
clients and uncheck those that you want to deny.