User manual

User Manual
Page 57 of 57
1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On bottom of this equipment is a label that contains, among other information, a product identifier of
[US:4J2DL01BDSL5085EN]. If requested, this number must be provided to the telephone company.
2. If this equipment [ADSL2+ 4-Ports 300Mbps Wireless-N Modem Router] causes harm to the telephone
network, the telephone company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
3. The telephone company may make changes in this facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modification to maintain uninterrupted service.
4. If you experience trouble with this equipment, you disconnect it from the network until the problem has
been corrected or until you are sure that the equipment is not malfunctioning.
5. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not
alternate or repair any parts of device except specified.
6. Connection to party line service is subject to state tariffs. Contact the state public utility commission
public service commission or corporation commission for information.
7. If the telephone company requests information on what equipment is connected to their lines, inform
them of:
a. The telephone number that this unit is connected to,
b. The ringer equivalence number [0.1B]
c. The USOC jack required [RJ11C], and
d. The FCC Registration Number [US:4J2DL01BDSL5008EN]
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to
determine how many devices can be connected to your telephone line. In most areas, the sum of
the RENs of all devices on any one line should not exceed five (5.0). If too many devices are
attached, they may not ring properly.
Service Requirements
In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent.
It is the responsibility of users requiring service to report the need for service to our Company or to one of our
authorized agents.