User`s guide

Figure 20 (Ping test)
4.7.5 Modem Test
The Modem Test is used to check whether your ADSL Router is properly connected to the WAN
Network. This test may take a few seconds to complete. To perform the test, select your
connection from the list and press the Test button. Before running this test, make sure you have
a valid DSL link; if the DSL link is not connected, this test will always fail.
Also the DSLAM must support this feature; not all DSLAMs have F4 and F5 support.
4.8 Status
The Status section allows you to view the Status/Statistics of different connections and interfaces
4.8.1 Network Statistics
Select to view the Statistics of different interfaces - Ethernet/USB/DSL.
4.8.2 Connection Status
Select to view the Status of different connections.
- 32 -