User's Manual

U s e r M a n u a l 7
Configuring Internet Properties
To set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties.
3. Click Connections tab.
4. In the Dial-up and Virtual Private Network settings pane, select Never dial a
connection.
5. Click OK to close Internet Properties.
Removing Temporary Internet Files
Temporary Internet files are files from Web sites that are stored in your computer. Delete
these files to clean the cache and remove footprints left by the Web pages you visited.
To remove temporary Internet files:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control and then click OK. This opens Control Panel.
3. Double-click Internet Options. This opens Internet Options.
4. In the Temporary Internet Files pane, click Delete Cookies.
5. Click Delete Files.
6. Click OK to close Internet Properties.
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the
router, the main computer, and your other computer devices.
To setup the router:
1. Plug one end of the Ethernet cable from the router’s Ethernet port and then plug
the other end into the Ethernet port of your computer.
2. If you have another device you need to connect through wire into the router, use
another piece of Ethernet cable. Plug one end of the Ethernet cable from the
computer’s Ethernet port and then plug the other end into an available Ethernet
port in the router. (Applicable for multi-port devices)
3. Plug one end of the telephone cable from the POTS Splitters ADSL port and then
plug the other end into the router’s DSL port.
POTS Splitter (DSL Microfilter)
Your phone line carries both phone calls and Internet signals. When you are using
the Internet, the connection produces high-pitched tones that can affect your voice
calls when using the phone. Installing a Plain Old Telephone Service (POTS) splitter
separates your phone call signals and internet signals which eliminates the noise.