User manual

User Manual
Page 9 of 48
Label Status Description/ Function
A WPS Button / Wireless
LED
OFF • No power.
ON • When this button is pressed for 2 seconds it
will enable WPS function.
• When this button is pressed for more than 5
seconds it will reset the device.
• When the wireless LED is steady it means that
the Wireless Function is enabled.
B Power LED
OFF • No power.
ON • When Simple Connect is pressed for more
than 10 seconds, this LED will turn OFF and
turn ON to confirm the Private Network Name
reset.
• After Simple Connect is pressed for 2
seconds, this LED will blink to confirm the
button press.
C
Powerline Activity
OFF Device is not connected to a HomePlug AV network.
ON • When Simple Connect is pressed for more
than 10 seconds, this LED will turn OFF to
confirm the Private Network Name reset. (If
PLC is active, If not this LED remains OFF)
• This LED is steady in color when the device is
part of a HomePlug AV network.
• The LED colors represents the connection
rate within the HomePlug AV network
whether it is good (red), better (amber), or
best (green).
D Ethernet Activity
OFF An Ethernet device is not connected.
ON • This LED is steady when an Ethernet device is
connected.
• The LED flashes to indicate Ethernet activity.
E Ethernet Port
Accepts either cross or straight Ethernet cable.
F
Simple Connect Button Press to create or join a HomePlug AV network.
When Simple Connect is pressed for more than 10
seconds, it will randomize the Private Network Name.
Then Press for 2 seconds to pair the device.
G
Dual Band Switch
(2.4Ghz/5Ghz)
This allows you to manually switch to either 2.4 Ghz or
5 Ghz frequency band.