User manual

User Manual
Page 24 of 90
Diagnostics
Diagnostic Test is used for investigating whether the router is properly connected to the
WAN Network. This test may take a few seconds to complete. To perform the test, select
your connection from the list and press the Test button. Before running this test, make
sure you have a valid DSL link.
To run diagnostic test:
1. Select the Basic Menu
Basic Menu Basic Menu
Basic Menu and then click Diagnostics
DiagnosticsDiagnostics
Diagnostics. This opens the Diagnostics
DiagnosticsDiagnostics
Diagnostics page.
2. Click Test
TestTest
Test. The test status will appear after running the diagnostic test. If a test
failed, click Help
Help Help
Help to get the solution.