User manual

User Manual
Page 55 of 90
Web Access Control
The Web Access Control page allows you to access the router via the web from a remote
location like your home or office.
Web Access Control
Web Access ControlWeb Access Control
Web Access Control
To configure Web Access:
1. Select Advanced Menu
Advanced MenuAdvanced Menu
Advanced Menu.
2. Select Application > Web Access Control
Application > Web Access ControlApplication > Web Access Control
Application > Web Access Control.
3. Select Enable
EnableEnable
Enable.
4. Select the connection used to connect to the Internet in the Choose a connection
Choose a connectionChoose a connection
Choose a connection.
5. Configure the following fields:

Remote Host IP
 Remote Netmask

Redirect Port
6. Click Apply
Apply Apply
Apply to temporarily activate the settings on the page. The WAN address is
now added into the IP Access List. This allows you to access you router remotely.
7. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.