User manual

ManualsBrandsAztech ManualsComputer equipmentWL580E

The WL580E’s SMART LED indicator allows you to

determine the strength of the received signal from

your router as seen below:

C Hardware Setup

NOTE: Before proceeding, kindly turn OFF/disable

any wireless adapters in your computer.

The following items are included in your WL580E package.

Please contact your Dealer if any of the following items

below are missing from your package.

FONT SIZE : 10 for content || 12 for Title

TRACKING: -30

LEADING : 20 (Double Spacing)

Knowing more about your WL580E’s

SMART LED Indicator

Kindly follow the instructions below in setting up your

device. You may refer to the diagram provided for additional

reference.

A Package Contents B Device Overview

Connect one end of the Ethernet cable to the WL580E

Repeater and the other end to the Ethernet port of your

computer.

WPS Button

SMART LED

Indicator

5.0GHz LED

2.4GHz LED

Power LED

Reset

Ethernet

Port

Plug in the WL580E Repeater to the power outlet.

Switch on the power outlet.

Through the LED indicator, you may easily identify the

areas in your house where the wireless reception from

your main router is weak or has no wireless signal.

You may then place the WL580E Repeater between the

wireless router and the location of the weak wireless

signal.

It is ideal for the WL580E Repeater to be placed in a

location, where it can receive good wireless signal

from the wireless router. This is to ensure that a signal

of good quality would be extended to other wireless

devices.

WL580E Repeater Resouce CD

Ethernet Cable

(RJ45)

Easy Start

Guide

2.4GHz/5.0GHz LED Behaviors

OFF

No wireless device is connected.

Blinking

Wireless devices are currently connected and is actively

transmitting/ receiving data.

Easy Start Guide

WL580E |

Dual Band 300Mbps

Wireless-N Repeater

Summary of content (2 pages)

PAGE 1
A B Package Contents The following items are included in your WL580E package. Please contact your Dealer if any of the following items below are missing from your package. Device Overview WPS Button SMART LED Indicator 5.0GHz LED 2.4GHz LED Power LED C Hardware Setup Kindly follow the instructions below in setting up your device. You may refer to the diagram provided for additional reference. ! NOTE: Before proceeding, kindly turn OFF/disable any wireless adapters in your computer.
PAGE 2
E Connecting Your Wireless Devices Connecting the WL580E Repeater to the Wireless Network 3. Input the Wireless Password of the chosen Wireless SSID and click the Apply button. 1. Launch a web browser (e.g. Internet Explorer) from your computer.You will be redirected to the WL580E Repeater’s user interface. If in any case it doesn’t, type http://10.0.10.254 in the address bar and then press Enter. For 2.