User's Manual

ManualsBrandsAzumi ManualsCell PhonesMobile Phone

Phone layout

The phone has 21 keypad keys,and a charger/headset port.

Icons on the main screen

Alarm Gprs Unread message Ring Battery Vibrate Ring and vibrate

Ring after vibrate

Bluetooth

Basic operation

insert sim card

1. Earpiece 2. Display

3. Left key 4.Right key

5.Call/Dial Key 6.End/Power Key

7.Navigation Keys 8.Center Key

9.MIC 10.Camera

11.Back Cover

Summary of content (5 pages)

PAGE 1
Phone layout The phone has 21 keypad keys,and a charger/headset port. 1. Earpiece 3. Left key 5.Call/Dial Key 7.Navigation Keys 9.MIC 11.Back Cover 2. Display 4.Right key 6.End/Power Key 8.Center Key 10.
PAGE 2
Push the back cover above the battery downward and remove it in order to nsert the SIM card into the SIM card slot. insert micro SD card Push the back cover above the battery downward and remove it in order to insert the card into the card slot. Note:Before to inseter Sim card or SD card, you must to power off the mobile phone 1、Switch On/Off the Phone To turn on/off the phone, press and hold the End/Power key.
PAGE 3
5、Options During a Call Press to use the following functions during the call: • Hold: temporarily hold the current call. • End Single Call: end the current call. • New Call: call the opposite party to build a Call to Many. • Phonebook: enter in the phonebook menu. • Call History: access the call logs. • Messaging: enter in the SMS menu. • Sound Recorder: record the current call. • Mute: open or close the mute mode. • DTMF: open or close the DTMF function during the call.
PAGE 4
2 Select the alarm you want to turn off, press Edit. 3 Press the navigation key to select Off then press right soft key to save. Stop an alarm When the alarm rings, • Select Stop: The alarm stops. • Select Snooze: The alarm will sound again after the set Snooze (min) interval. 8. Audio player Use this function to play audio files.
PAGE 5
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.