USER MANUAL L4G Keys and components of the phone 1. Receiver Speaker 2. Screen 3. Left Function Key 4. Right Function Key 5. Call button 6. Hang up / Power Key 7. OK button 8. Navigation buttons 9. Keypad 10.Lock phone 11. Turn on flashlight 12. Activate silent Mode 13. Camera 14. Flashlight 15. Speaker 16. Microphone 17. Earphones Connector(Jack 3.5 mm) 18.
Insert the SIM card / Insert the memory card Basic functions 1. How to remove the back cover • Make sure the device is turned off. • Hold the device firmly with the front facing down. • Slide your finger into the groove designed to remove the cover and gently remove the back cover. How to insert the SIM card: Locate the SIM card slot and insert the SIM as shown in the figure. Additionally you will have a visual aid, as reference, of where the SIM card is inserted.
1. Operation of the Menu 1.1 Messages The phone supports short message service (SMS). You can send text messages and manage the messages sent and received. In the standby mode, go to the main menu by pressing the left function key and select the message center to enter the message interface. In the message, select the options to view and operate the available options. 1.2 My files Use the File Manager to organize the files in folders.
The phone is equipped with an FM radio. You can use the application as a traditional FM radio with automatic tuning and saved stations. You can listen to the radio while running other applications. 1.6.7 Video This function plays video files. By pressing the OK key you can play and pause the video, by pressing the arrow keys you can control the video volume, volume + (up arrow key), volume (down arrow key). Advance and rewind a video / forward (press right arrow key) / rewind (press left arrow key). 1.
-Others -Call time minute Reminder:allows you to set a tone for a reminder while being on a call for every minute. - Auto redial: allows you to call the dialed number if you do not get a response from the contacted user. -Vibration when connected: indicates by means of a vibration that the call was connected correctly. - Auto record voice call: Automated recording of calls when answering the phone 1.9.
Available modes: Normal mode, Silent mode, metting mode,Indoor mode, Outdoor mode. The user can also reset the individualized modes by pressing the left function key to enter the option interface. You can customize the following options for new profiles. - Normal: You can select this mode for normal conditions. - Silent: You can select this mode for quiet conditions. -Metting mode: You can select this mode at meetings. - Indoor: You can select this mode in closed spaces.
“Our team is always available to respond to your queries” Appearance FCC Caution. §15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. §15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
