Owner's Manual

11
Installation Instructions (continued)
Attention
 Never overload the cabinet.
 Never open the door unless necessary.
 Never cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
 Should the Azure appliance be left empty for long periods, it is suggested that the appliance be unplugged,
and, after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid
possible condensation, mold or odors from forming.
Electrical Connection
Check that the voltage marked on the product corresponds with your supply voltage.
WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or an authorized service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a
three-pin plug which mates with standard three-pin wall outlets to minimize the possibility of electrical shock.
Never under any circumstances cut or remove the third ground prong from the power cord supplied. For personal
safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC~60Hz electrical ground outlet with three pins. Have the
wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a
standard two-pin wall outlet is encountered, it is your responsibility and obligation to have it replaced with a
properly grounded three-pin wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or dangling.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that
matches the rating label on the appliance. This provides the best performance and also prevent overloading
wiring circuits that could cause a fire hazard from overheating. Never unplug the appliance by pulling the power
cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all
power cords that have become frayed or otherwise damaged. Never use a cord that shows cracks or abrasion
damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
Electrical fuse protection of at least 10 amperes must be provided. If the socket is no longer accessible once the
appliance has been built-in, suitable measures must be taken during electrical installation to ensure that the
appliance can be disconnected from the electrical socket when needed.
Never use your appliance with an extension cord unless this cord has been checked and tested by a qualified
technician or service person. The extension cord must be a UL/CUL Listed, 3-wire grounding extension cord
that has a grounding plug and outlet and that the electrical rating of the cord is 115 volts and at least 10 amperes.