User's Manual

- 9 -
5. In the Download: com @115200 window,
a. select 20702 A0/A1/B0 Runtime RAM for Device configuration
b. mark From burn image
c. key in 0x00090000 on SS location
d. click Locate
e. select the configuration
f. click open
g. click Execute
h. close the window
D. Verify the DUT condition by reading the BD address
1. In the HCI Control window
a. mark HCI protocol active ,select 7.4 Informational Parameters(4 keys)from it
b. Double-click Read BD ADDR.
2. The Log Window will show the BD address.