User's Manual

- 13 -
4. Run the following command set
11b/g rate:
wl mpc 0
wl phy_watchdog 0
wl country ALL
wl band b
wl channel
7
wl up
wl phy_forcecal 1
wl scansuppress 1
wl rxchain 1
wl reset_cnts
wl counters
This will enter Channel 7 receive mode.
2.4G 11n 20 SISO rate:
wl mpc 0
wl phy_watchdog 0
wl country ALL
wl band b
wl chanspec
1/20
wl up
wl phy_forcecal 1
wl scansuppress 1
wl rxchain 1
wl reset_cnts
wl counters
This will enter Channel 1, bandwidth=20Mhz receive mode.