User's Manual

4-3
Realtek RTL8187 Wireless LAN USB 2.0 Adapter
User Guide
4.2 Wi-Setup Wizard Steps
Whatever which wireless
configuration you would set up,
the first scene of Wi-Set Wizard
is “Select Operation Mode”
dialog that shows as right
picture. You could select either
station or AP mode from the
first step.
For Ad-hoc and infrastructure
type configuration, you should
select Station mode. The
software access point
configuration could be archived
by select AP mode.
z Station
Set the operation mode to be “Station”. Follow steps in section 4.3.
z AP
Set the operation mode to be “Access Point”. Follow steps in section 4.4.
z Next
Go to next step of selected mode.
z Cancel
Give up Wi-Set Wizard. The default wireless configuration will be automatically applied as
“Infrastructure” type of Station mode if user won’t set it up here.
4.3 Station Mode Configuration
Two types, infrastructure and ad-hoc types, of station mode are provided here.