User's Manual

4-5
Realtek RTL8187 Wireless LAN USB 2.0 Adapter
User Guide
Select valid wireless IBSS, Infrastructure Basic Service Set, connection nearby your system for
connecting. The listed IBSS are touchable access point around you. You have to pick one from
the list and go to next.
z SSID list box
Four fields are shown in the list box to provide access point status.
 SSID: the name of access point
 Security: the security status of access point. None means security/password is not necessary.
WEP means the access point acquire security/password to log in.
 Channel: the channel this access point applies.
 Signal: The signal strength; higher mean better.
z Refresh
Rescan the IBSS list.
z Back
Go back to previous step ~ Select Station Type.
z Next
Go to next step of infrastructure type configuration. It is relative the security status of
selected access point.
 None: Setup TCP/IP.
 WEP: A WEP dialog is pope dup before Setup TCP/IP as below picture. You have to input the
password/network key to join this access point before setup TCP/IP. The password/network key
is defined by the administrator of access point. The invalid network key will stop going to next
step.