User Manual

3
-
12
 WEP Encryption
An encryption system prevents eavesdropping on wireless network traffic.
 Enable: The joined wireless station should have same network/password key with this access
point.
 Disable: no network/password key is required for joined wireless station.
 Authentication
The next generation of Wi-Fi security, Wi-Fi Protected Access, or WPA, will use
authentication to verify whether users have access to a particular wireless network.
 Open system: This access point is without authentication protection with user.
 Share key: Any station would join this access point should pass with key same as the setting on
access point.
 Back
Go back to previous step ~ Setup a Wireless Network.
 Next
Go to next step. It depends on the setting of WEP and Authentication.
Authentication
Encryption
Open system Shared key WPA-PSK
WEP WLAN Security
WEP(Disable) Show Network Setting n/a
 Cancel
Give up current Wi-Set Wizard setup and roll back to previous configuration.
Wireless Network Security
Two types pass key, ASCII and
Passphrase, perform security with
different level.
 ASCII
You should provide either 5 or 8 ASCII
characters on Network key edit box.
 PASSPHRASE
You could input words on Network
Key edit box.