Azure Wave AW-GM100 Wireless LAN User Guide Release History: 0.
Contents: Section 1 Getting Start ......................................................................................................................... 1-3 1.1 Overview.................................................................................................................................... 1-3 1.2 Equipment .................................................................................................................................. 1-3 1.2.1 Standard Mini-PCI Adapter .....................
Section 1 1.1 Getting Start Overview This document describes how to install and use the AzureWave GM100 Mini-PCI adapter. So does the software command line interface to test the installed adapter. In section 1, we introduce you the basic instruction manual for GM100. In section 2, we represent the software installation for GM100. In section 3, we introduce the command line interface as test reference. 1.2 1.2.
1.3 System Requirement The only requirement of system is to provide Mini-PCI slot and support PCI device. AzureWave GM100 represents as a standard PCI device in system platform that satisfies Plug-And-Play specification. Standard PCI device access could detect GM100 without problem. Then you could follow the software installation, descript in later sections. 1.
z IEEE 802.11b data rates of 5.5 and 11 Mbps z IEEE 802.11g data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbps for multimedia content transmission z IEEE 802.11a data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbps for multimedia content transmission z Proprietary data rate of 22 Mbps (802.11b) WLAN Frequency band z 2.4 ~ 2.497 GHz ((Industrial Scientific Medical Band) Operation Channel z Channel 1 ~ 11 for Tiawan ,USA, CANADA Compatibility z Fully compatible to IEEE 802.
Section 2 Windows Driver Installation The supported Windows® platforms are Windows 98®, Windows Millennium®, Windows 2000®, Windows XP® and Windows 2003®. In the software package, there are two folders, Utils and Inf, each represents specifically for utility and windows installation file. Under Utils folder, the Mrv8000x.exe leads you to install AzureWave GM100 utility step-by-step.
2.1.2 Welcome The next step is the welcome scene and then the license dialogs. Only if you agree the license then you could go to next step. Please read the contents of license agreement before going to next step.
2.1.3 Customer Information Enter your information to the two edit-boxes by following the instruction above them. You could decide to open the use right of configuration utility to either everyone whom could login this system or the current user for system management purpose. 2.1.4 Setup Type In this step, you could select either “Complete” or “Custom” as the installation type. The complete type will directly lead you to section 2.1.5.
In this step, you could decide the location to install the program. Press “Change” button to browse the folder and location you prefer. 2.1.5 Read Install This step is the last chance you could roll back to previous step before starting installation. As you decide to install configuration utility, press “Install” button to start program installation.
2.1.6 Finish After a while with progress dialog running, shows up the latest step, finish dialog, to inform you all the program had been installed completely. Press “Finish” button to close setup program. 2.1.7 Odyssey ~ Welcome This step starts the installation of Odyssey client management utility.
2.1.8 Odyssey ~ License Agreement You should agree the license agreement before going to next step. 2.1.9 Odyssey ~ Finish When you see this step, all Odyssey components are installed. Press “Finish” button to close setup.
2.2 Device Driver Installation of the driver allows access to the hardware memory space. The following files are required: z MWLAN.inf z windrvr.sys To install the driver, boo-up with a Mini PCI installed. Follow the prompts of the Wizard and point to the MLAN.inf file for installation. Section 3 3.1 Network Management Software Marvell Client Configuration You could get device status and network throughput analysis of Marvell 35P from this utility as above figure.
3.2 Odyssey Client Management Odyssey provides easy use user interface to help you configure network connection. You could select the candidate wireless LAN adapter to build up desired configuration. z Connection You could setup network connections in this page. z Profiles You could create and manage profiles of access point that this station would become. z Networks You could create and manage profiles of connected access point.
You could review network adapter on this system. Appendix A: 0.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.