Data Sheet

2
FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever
The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed
in whole or in part without prior written permission of AzureWave.
Features
WLAN
 1 antennas to support 1(Transmit) 
1(Receive) technology and Bluetooth
 High speed wireless connection up to
433.3Mbps transmit/receive PHY rate using
80MHz bandwidth
 Backward compatibility with legacy
802.11n/a/g/b technology.
 20MHz bandwidth/ channel, 40MHz
bandwidth/ channel, upper/ lower 20MHz
packets in 40MHz channel, 20MHz duplicate
legacy packets in 40MHz channel mode
operation.
 80MHz bandwidth/ channel, 4 positions of
20MHz packets in 80MHz channel, upper/
lower 40MHz packets in 80MHz channel,
20MHz quadruplicate legacy packets in
80MHz channel mode operation.
 Dynamic frequency selection (radar
detection)
 Enhanced radar detection for long and short
pulse radar.
 Enhanced AGC scheme for DFS channel.
 20/40/80Mhz coexistence with middle-packet
detection (GI detection) for enhanced CCA.
 1 spatial stream STBC reception.
 LDPC transmission and reception for both
802.11n and 802.11ac.
 256 QAM (MCS 8, 9) modulation, optional
support for 802.11ac MCS 9 in 20MHz using
LDPC.
 Short guard interval.
 Temporal Ley Integrity Protocol (TKIP)/ Wired
Equivalent Privacy (WEP)/ Advanced
Encryption Standard (AES)/ Counter-Mode/
CBC-MAC Protocol (CCMP).
 Cipher-Based Message Authentication Code
(CMAC)/ WLAN Authentication and Privacy
Infrastructure (WAPI).
 External Crystal frequency
Bluetooth
 Baseband and radio BDR and EDR packet
types – 1Mbps (GFSK), 2Mbps (п/4-DQPSK),
and 3Mbps (8DPSK).
 Fully qualified Bluetooth BT4.2 and support
Bluetooth 5.
 Enhanced Data Rate (EDR) compliant for
both 2Mbps and 3Mbps supported.
 High speed UART and PCM for Bluetooth.
 Fully functional Bluetooth baseband-AFH,
forward error correction, header error control,
access code correlation, CRC, encryption bit
stream generation, and whitening.
 Adaptive Frequency Hopping (AFH) using
Packet Error Rate (PER).
 SCO/ eSCO links with hardware accelerated
audio signal processing and hardware
supported PPEC algorithm for speech quality
improvement.
 Standard Bluetooth power saving
mechanisms.
 Automatic ACL packet type selection.
 Full master and slave piconet support.
 Scatternet support.