User manual

US6000 FULL ELECTRIC: HEAD SECTION TO FOOT SECTION ASSEMBLY
Slot Pin
Slot Pin
Motor Cams
FOOT
SECTION
HEAD
SECTION
1. Place the Head and Foot Sections on their sides at approximately right angles to each other
with Motor Cams up, as shown above.
2. Slide the Head and Foot Sections together until the Head Section’s Pins seat into the Foot
Section’s Slots on both sides. Ensure the Pins are completely seated before continuing.
FOOT
HEAD
Straighten
Head
Wing
3. With the Pins fully seated in the Slots as described in step 2, rotate and straighten the bed as
shown above. Position Head Wing as shown above.
US5000-INS-LAB-RevA14 16