User manual

ASSEMBLY INSTRUCTIONS: US5000 / US6000

US5000 / US6000: POWER CORD ROUTING AND ATTACHMENT TO MAIN FRAME

RAIL

After bed assembly, secure the Power Cord to the Main Frame Rail with Cable Ties so that there

are no pinch points or interference.

Ensure there is a little slack so the Power Cord does not pull too tight when decks are raised and

lowered, but not too much slack — the Power Cord must not dangle in such a way that it may

catch on any bed part or accessory.

The Power Cord is hardwired into the Foot / Head Motor. Run the Power Cord along the outside of

the Main Frame Rail toward the bed head end as shown below (Note: US5000 is shown below, but

Power Cord routing and attachment is identical for US5000 and US6000).

s NOTICE: The Power Cord MUST be secured to the Main Frame Rail so there are no pinch

points or interference, and so it does not catch on any bed part or accessory.

Power Cord is hardwired

into

Foot / Head Motor —

run Power Cord along outside

of Main Frame Rail toward head

end of bed.

Secure Power Cord to

Main

Frame Rail with

Cable Ties so

there are no pinch

points or interference.

Ensure there is a little slack so

the Power Cord

does not pull too

tight when

decks are raised and

lowered, but not too much slack —

Power Cord must not dangle in

such a way that it may catch on

any bed part or accessory.

HEAD END

FOOT END

US5000-INS-LAB-RevA14