User manual

OPERATION INSTRUCTIONS: US6000 FULL ELECTRIC
US6000 FULL ELECTRIC: PENDANT HAND CONTROL OPERATION
WARNING: Ensure that the bed is secure and assembled properly per instructions in
this manual before operating.
Plug the Power Cord into any grounded outlet.
WARNING: Do not leave the bed unattended when plugged in.
Lower Head
Lower Foot
Lower Bed
Raise Head
Raise Foot
Raise Bed
US6000 Full Electric
Pendant Hand Control
The Pendant Hand Control is shown above with each button function labeled. The Pendant Hand
Control is used to change the angle of the Head and Foot / Knee Decks and bed elevation. Each
button has a different function, as shown above.
POWER FAILURE
Info: In the event of a power failure, use a standard 9V battery (not included) to lower the
bed’s Head and Foot / Knee Decks. The 9V battery connection is attached to the Foot / Head
Motor. When used with the battery, the motor will only lower, not lift, the Head and / or
Foot Deck.
WARNING: To lower the Head and / or Foot Deck in the event of a power failure, use a
standard 9V battery as instructed in preceding paragraph.
US5000-INS-LAB-RevA14 27