User manual

4 ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS: US5000 SEMI-ELECTRIC

s NOTICE: Perform the steps on this page rst after removal of bed from carton. The

Manual Hi / Lo Drive Rod (Hi / Lo Rod) must rst be attached to each bed section and

secured with the Lanyard BEFORE assembling the Patriot LX sections together.

US5000 SEMI-ELECTRIC: MANUAL HI / LO DRIVE ROD ATTACHMENT TO FOOT

SECTION AND HEAD SECTION

US5000 Semi-Electric: Manual Hi / Lo Drive Rod to Foot Section Attachment

FOOT

SECTION

Closeup of Foot Hi / Lo Rod

and Lanyard Connection

Pull out Foot Section

from Carton

Lift Legs up slightly to move

Hi / Lo Rod toward Foot End

Crank

Line up holes in Hi / Lo Rod and Crank Pin

Lanyard Assembly

with Clevis Pin and

Hair Pin Clip

Hi / Lo Rod

1. Pull the Foot Section out of the packaging carton and lay it at, resting on decks, as shown at

right above.

2. Release the Hair Pin Clip from the Clevis Pin on the Lanyard near the foot end of the Hi / Lo Rod

shown in the Closeup above.

3. Lift the leg weldment up slightly until the Hi / Lo Rod slips fully onto the Crank Pin and the

small holes line up.

4. Insert the Clevis Pin through the holes and secure it with the Hair Pin Clip.

US5000-INS-LAB-RevA14