User manual

US5000 Semi-Electric: Manual Hi / Lo Drive Rod to Head Section Attachment

Pull out Head Section

from Carton

HEAD

SECTION

Closeup of Head Hi / Lo Rod

and Lanyard Connection

Crank

Line up holes in Hi / Lo Rod and Crank Pin

Lanyard Assembly

with Clevis Pin and

Hair Pin Clip

Hi / Lo Rod

Lift Legs up slightly to move

Hi / Lo Rod toward Head End

1. Pull the Head Section out of the packaging carton and lay it at, resting on decks, as shown

above.

2. Release the Hair Pin Clip from the Clevis Pin on the Lanyard situated near the head end of the

Hi / Lo Rod.

3. Lift the leg weldment up slightly until the Hi / Lo Rod slips fully onto the Crank Pin and the

small holes line up.

4. Insert the Clevis Pin through the holes and secure it with the Hair Pin Clip.

US5000-INS-LAB-RevA14