User's Manual

COAT015197 – Instruction manual ONE-C – EN
16
Valeur_Filtre_Chocs
Detection threshold of a frontal impact in
the closed position for counting the
number of impacts suffered (default: 200)
●
Duree_Filtre_Chocs
Duration of the pulse created by an edge
for taking the count into account (default:
2s)
s
●
Numero_Serie
Barrier serial number (not configured). To
be configured in order to be able to read
it from the modbus exchange table
●
●
T_pos_ouverte
Time during which the barrier remains
open before closing after reopening on
obstacle detection (if activated) (default:
2s)
s
●
●
T_detection_choc
Time during which the arm must be
blocked to consider an obstacle (default:
0.1s)
s
●
●
Rampe_detection_choc
Degree variation below which the arm is
considered blocked for the set time
(default: 2.0°)
°
●
●
Réouverture_obstacle
Activation of the automatic reopening
function on obstacle detection during
closing
(TRUE: enabled; FALSE: disabled).
●
●
Nb_chocs_autorises
Number of reclosing attempts after
obstacle detection before the barrier
goes into default (default: 3)
The fault can be reset by sending an
opening order
●
●
Note: This is a default list. It can change according to the type of barrier and customer.
Important : The settings in grey must not be modify without contacting the after-sale service.