Industrial Dehumidifier Operating Instructions Model: VG 1500
Read and save these instructions. This instruction manual provides important information concerning the use and care of the B-Air Vantage 1500 Commercial Dehumidifier – Model VG 1500. Please read and follow these instructions in order to ensure the safe operation and maximum performance of your unit. For any questions relating to the use and operation of the unit, please contact: 877.800.2247 or email info@b-air.com Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.
WARNING: This dehumidifier is not classified as “intrinsically safe” and should not be used in the following hazardous locations as defined by the Underwriters Laboratories: Class I Division 1, Class I Division 2, Class I Zone 0, Class I Zone 1, Class I Zone 2, Class II Division 1, Class II Division 2, Class III Division 1, Class III Division 2. Refer to the UL web site: http://www.ul.com/hazloc/define.htm.
Defrost Indicator The defrost indicator lamp will illuminate to indicate the dehumidifier is in defrost cycle. During this period, the compressor is running and the system has reversed. Venting/Ducting Exit air can be ducted on the dehumidifier. Using ducting larger than 6.7” in diameter is recommended. and liquid refrigerant sufficient time to redistribute. Failure to do so can cause premature compressor failure, and voids the compressor warranty.
STORAGE Freezing temperatures and biological growth must be considered before storing the dehumidifier. The dehumidifier should be flushed with a bio fungicide before storing. When storing the unit, ensure that water has been removed from the reservoir and hose. This will prevent damage caused by freezing temperatures and to prevent biological growth. Use the pump purge button to remove water and bio fungicide chemicals from the dehumidifier.
LIMITED MANUFACTURER’S WARRANTY The manufacturer warrants that goods sold to the original user shall be free from defects in material and workmanship as follows: 1-year parts and labor on the entire unit. • • DAY 1-15: A unit that fails within the first 15 days after the sale to an end-user may be eligible to be replaced with a new unit at the sole discretion of the manufacturer. All transportation costs will be covered for the customer.
Establishing the proof of purchase date for warranty purposes is the responsibility of the end-use customer, failing which, the effective date will be based upon the date of manufacture plus thirty (30) days. Retain your bill of sale as proof of purchase. For warranty information and assistance contact B-Air and request the assistance of a technician at 877.800.2247 or email warranty@b-air.
TROUBLESHOOTING GUIDE – COMMERCIAL DEHUMIDIFIER WARNING: Some diagnostics contained herein are for the guidance of qualified service personnel only. Improper troubleshooting or servicing could result in fire, shock, explosion, or mechanical injury hazards that can cause personal injury or death. *This troubleshooting guide is intended for use by qualified service personnel.