OWNER’S MANUAL GRIZZLY B-AIR DRYER / BLOWER MODEL #GP-1 INTRODUCTION • OPERATION • SAFETY • SERVICE • WARRANTY • CONTACT • SPECIFICATIONS • TROUBLESHOOTING READ AND SAVE THESE INSTRUCTIONS
INTRODUCTION TO GRIZZLY B-AIR GP-1 YOUR NEW GRIZZLY B-AIR GP-1 BLOWER AND DRYER HAS A 1 HP HIGH EFFICENCY MOTOR WITH THE FOLLOWING FEATURES: • STATE OF THE ART CONSTRUCTION • SAFETY SCREENS ON OPEN VENTS • EASY TO USE CARRYING HANDLE • “KICK STAND” ALLOWS FOR ADDED HEIGHT WHEN NEEDED. • OPTIONAL TIMER • 3 SPEED SWITCH OPERATION/USE THIS HIGH AIR VOLUME BLOWER IS INTENDED TO DRY, INFLATE, AND MOVE AIR. IT IS SUITABLE FOR A VARIETY OF APPLICATIONS.
SAFETY 1) KEEP CHILDREN AND PETS AWAY FROM UNIT WHILE IN OPERATION AND/OR PLUGGED IN. 2) DO NOT PUT FINGERS OR OTHER OBJECTS IN UNIT WHILE IN OPERATION AND/OR PLUGGED IN. 3) TO AVOID ELECTRIC SHOCK DO NOT OPERATE IN POOLED WATER 4) MOTOR MUST BE KEPT DRY AT ALL TIMES. IF UNIT BECOMES WET, THOROUGHLY DRY BEFORE NEXT OPERATION. 5) INDOOR USE: USE ONLY WITH A GROUNDED PLUG AND/OR EXTENSION CORD TO AVOID RISK OF ELECTRICAL SHOCK OR FIRE. REMEMBER NEVER TO USE A CORD WITH ANY KIND OF DAMAGE OR WEAR.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD. WARRANTY 1 YEAR: B-Air will cover all parts(except cords). Within one year of purchase B-Air will pay repair labor costs and one-way UPS Ground Service shipping to your location within the 48 contiguous states. Proof of purchase is required Customer is responsible for shipment of damaged unit to B-Air warehouse for repair.
CORDS 1) DO NOT USE EXTENSION CORDS FOR OUTSIDE USE. 2) USE 3 PRONG ADAPTORS THAT ARE UL AND CE APPROVED AND NOT LESS THAN 14-3 WITH GROUND FAULT CIRCUIT INTERRUPTER (GFCI). 3) DO NOT USE CORDS THAT SHOW ANY KIND OR WEAR OR DAMAGE. 4) CORDS ARE NOT COVERED BY WARRANTY.
SPECIFICATIONS MODEL# GP-1 VOLTS CYCLE MAX AIR VOLUME AMPS MAX STATIC PRESSURE WEIGHT NET/SHIP UNIT SIZE (L x W x H) WHEEL SPEED (RPM) MOTOR ATTACHED CORD SPEEDS STAND HEIGHT TIMER OPTIONAL 230 V 50 Hz 3180 CFM 6.5 A 2.8 INCH 39/43LBS 19”x 18”x 19.5” L 1070 / M 1190 / H 1400 1 HP 25 FT 3 4.5” 42 MINUTE 115 V 60 Hz 3550 CFM 9.8 A 3.1 INCH 39/43LBS 19”x 18”x 19.5” L 1300 / M 1440 / H 1720 1 HP 25 FT 3 4.
