Use and Care Manual

Unpacking & Checking Of Contents
Unpack your B-Air Vent VP-33 carefully and inspect if all parts are intact. If any of the parts are
missing or damaged, please call 1-877-800-BAIR (2247) or email [e-mail].
Operating Instructions
This B-Air Vent VP-33 requires NO ASSEMBLY. The VP-33 is packaged and ready to be put to
work.
The VP-33 is intended to be used for drying carpet spills, drying surfaces such as bathroom,
garage or room floors, ventilating and circulating air, as well as drying hard-to-reach areas such
as under a leaky sink or inside damp cabinets.
1. Place the unit on the surface that needs to be dried.
2. Plug the unit into a grounded outlet .
3. Select the desired speed and position (0º, 45º or 90º].
Maintenance
Cleaning
User Servicing Instructions
WARNING: As with all electrical equipment, the unit must be disconnected from
power before servicing or cleaning.
WARNING: To reduce the risk of injury from the air mover accidentally
starting, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
WARNING: Be sure to disconnect power supply before attempting to service or
remove any components. Do not attempt to service your air mover beyond what
is described in the user manual. For all other servicing, follow instructions in the
Warranty section.
1. Before each use, inspect the unit for damage, blocked inlets and exhaust and for foreign
material buildup.
2. When the Vent VP-33 is turned on, inspect the unit for excessive vibration. In the event
of excessive vibration or if the fan wheel rubs against the rotomolded housing,
immediately turn off the unit and have a certified technician inspect the unit.
90º Angle
Ceiling and Ventilation
45º Angle
Walls
Horizontal
Floors and Carpet
B-AIR.COM
6