Owner manual

The LEX unit

The LEX unit connects to the computer using the attached USB cable. Power for the system is provided by

the 24V AC adapter connected at the LEX unit. The LEX unit delivers power over the Cat 5 extension link to

the REX unit.

Front View

Rear View

ITEM TYPE DESCRIPTION

1 Power LED (Blue)

LED turns on when power is supplied. Off when no power is

supplied.

2 Link LED (Green)

Indicates a valid ExtremeUSB® link is established between the LEX

and REX units over the Cat 5 cabling. LED does not blink when in

suspend state.

3 Host LED (Green)

Indicates that the Ranger 2212 system is properly enumerated on

the host PC. LED blinks when in suspend state.

4 Activity LED (Amber)

Indicates activity when data transmission is active between LEX

and REX. LED blinks intermittently with or without a USB device

connected. When the LEX and REX are in suspend mode, the LED

is off.

5 Earth Ground

Optional earth ground connection to housing of unit. Accepts an

M2 type screw.

6 Power

Connects to 24V AC adapter supply. Required for proper operation

of the Ranger 2212 system.

7 USB Type B Port Used to connect the LEX unit to the host computer.

8 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better).

6 7