Specifications

Serial Card Setup
10 Chapter 2 Document Number 3PCI-0712m
Installing the Serial Card
CAUTION:
This is an Electrostatic Sensitive Device. Use ESD precautions for
safe handling.
Before removing the card from the anti-static protective packaging:
Discharge any static electricity buildup on your body by touching a large
grounded metal surface or the metal chassis on equipment connected to
earth ground by a 3-wire power cord. Use of a grounding wrist strap is
recommended.
Avoid touching the gold connectors or other parts on the card except
when necessary to set the configuration DIP switches.
Remove AC power from the computer before inserting the card
1. Shut down your computer.
2. Unplug the power cord to remove power to prevent accidentally turning on
the computer during installation.
3. Remove the cover of the computer.
4. Locate an empty PCI expansion slot.
5. Remove the expansion slot cover. Save the retaining screw.
6. Ground yourself to the computer chassis before and while inserting the card.
7. Install the card into the unused slot. Be certain that the card is inserted
completely (fully seated) in the slot.
8. Secure the card with the mounting screw from Step 5.
9. Replace the cover; plug in the power cord.
10. Connect your cables.
11. Power up the system.
12. Install the drivers as described in Chapter 3.