DS-PCIE-100 User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners.
Features and Benefits Features z Compliant with PCI Express Base Specification 1.
Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCIe slot. 4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.
D:\Drivers\PCIExpress\DS-PCIE-100\2000, then click OK. (Change D: to match your CD-ROM driver letter) 5. Click Next and Finish. 6. Restart Windows to complete the installation. For Windows® XP 1. At the Found New Hardware Wizard, select Install from a list 2. Insert the Driver CD, check Include this location in the search, or specific location (Advanced), then click Next. uncheck the other box, type in the following path D:\Drivers\PCIExpress\DS-PCIE-100\XP, then click OK.
2. Insert the Driver CD, check Include this location in the search, uncheck the other box, type in the following path D:\Drivers\PCIExpress\DS-PCIE-100\2003, then click OK. (Change D: to match your CD-ROM drive letter) 3. If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility. 4. Repeat steps 1-3 two more times. 5. Restart Windows to complete the installation. For Windows® Vista 1.
. Click on Close to complete the driver installation. To Verify Windows® Driver Installation 1. Right click My Computer, then click Manage. Click Device Manager. 2. Click on the +(plus sign) in front of Ports(COM & LPT), two MosChip PCI Serial Port … should be displayed. 3. Double click Multifunction adapters, MosChip PCI Multi-I/O Controller should be displayed. Change COM Port Number Some serial devices need a specific COM port in order to work.
4. Click OK, then close Device Manager to save the changes. Follow steps 1-4 again to change the other serial ports if needed.
