Specifications

Page 10

5. Environmental Specifications

The V-Smart shall be manufactured for indoor use, and if placed outdoors must be

installed within a complete Bioscrypt certified enclosure to protect the reader

against direct contact with the elements, including rain, sun, snow, or excessive

moisture. Failure to place V-Smart readers installed outdoors within such an

enclosure will void the warranty.

5.1. Bioscrypt Enclosure

The Bioscrypt certified enclosure shall be required for outdoor installations and

shall optionally include a heater that shall trigger on when temperatures

reach below 24° C (75° F). For further information on the Bioscrypt certified

enclosure, including power requirements and schematics, please contact

Bioscrypt Technical Support.

5.2. Temperature

The electronics and mechanical parts that make up the V-Smart reader shall

be rated to operate in a temperature range of 0° C to 60° C (32° F to 140° F).

However, the extremes of this temperature range will not be a comfortable

operating range for users of the system. The temperature range for the

environment in which the reader will be installed should be limited to 10° C to

50° C (50° F to 120° F). Additionally, the reader should not be placed in direct

sunlight or in uncontrolled environments (indoors or out).

5.3. Humidity

The V-Smart reader shall be rated to operate within a humidity range of 0% to

95% non-condensing.

5.4. Vibration

The environment in which the V-Smart shall be installed should not subject the

reader to vibration.

6. Electrical Specifications

6.1. Pigtail Connections

The V-Smart reader shall include a 15-pin DB15M connector for external

connections to power and other devices. A 15-conductor color-coded pigtail