Specifications

Page 18

mA with a maximum voltage drop of 1 VDC from a 5 VDC source. This drop is

load-dependent.

8.6. PC or other Host Device

The V-Smart reader shall support RS-232 and RS-485 serial communications

protocols for connection to a PC or other host device. Each V-Smart reader

shall include a VeriAdmin software CD. This software allows for reader

configuration and template management. For more information on the

VeriAdmin software functionality please refer to Section 11: VeriAdmin

Management Software. If connecting to a PC, it should have the following

characteristics:

 Operating System: Windows 98, ME, NT4.0, 2000, or XP (not compatible

with Windows 95)

 486-compatible

 16 MB RAM

 30 MB Disk space

 DB9 Serial communications port (do not support USB ports)

For more information on the RS-232 and RS-485 connections please refer to

Section 7: Communications.

Although the V-Smart reader does not have built-in Ethernet support, it may

be connected to a Lantronix UDS-10 Serial Device Server for this purpose. For

more information on this connection please refer to the application note

Configuration for Veri-Series Fingerprint Readers and Lantronix UDS-10 Serial

Device Server.

9. Operation

The V-Smart reader shall be designed to integrate easily into most access control

systems. To function, a fingerprint must be enrolled and stored on a MIFARE

contactless smart card and this can be done through the VeriAdmin software

included with the reader. Once a fingerprint is enrolled, authentication may be

performed any number of times. After authentication, the V-Smart shall send a

Wiegand string to the Access Control System or other host equipment for

appropriate action.

9.1. Fingerprint Template Capacity