Specifications

Page 2

The “finger mask” that surrounds the fingerprint sensor itself shall be a carbon

fiber conductive plastic.

3.3. Fingerprint Sensor

The V-Smart reader shall incorporate the Authentec, Inc. sensor model AF-S2.

The AF-S2 sensor shall be manufactured of silicon and shall be capacitive-

based. The sensor surface area shall measure 24 x 24 x 3.5 mm. The sensor

shall additionally incorporate Authentec’s TruePrint technology, which utilizes

a patented radio frequency (RF) imaging technique that allows the sensor to

generate an image of the shape of the live layer of skin that is buried

beneath the surface of the finger. For more information on this imaging

technology, please visit http://www.authentec.com.

3.4. Color

The V-Smart case shall have a charcoal gray body (ABS Grey – Pantone

426C). Furthermore, the color used in the “bioscrypt” text shall be Pantone

423C.

3.5. Weight

The assembled V-Smart shall weigh 15 ounces (packaged weight for shipping

shall be 1.6 pounds).

3.6. Mounting

The wall mounting plate shall be designed to mount to a double gang box

(the wall plate will not line up with the holes in a electrical square box) using 4

#6-32 screws in the oval holes. The shape of the holes shall provide for some

adjustment to ensure the wall plate is mounted level. The V-Smart may

additionally be mounted onto a wall anchor, wood or sheet metal using #4

flat head screws (thread diameter of <0.125 inch and a head diameter of

<0.250 inch) in the 4 outer holes.

The access hole in the wall for wiring should be less than 4.5” wide so that the

wall plate will cover it. It should also be less than 2.5” tall if mounting into a dry

wall so that there is enough material to hold the anchor. The recommended

size is 3.5” x 2.5”.