Specifications

Page 5

Operating Frequency Range: 13.553 – 13.567 MHz

RF Power Rating: 0.0 Watts

RF Output Impedance: 50 Ohms

4.2. FCC Information to Users

The V-Smart shall comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct

the interference at his own expense.

4.3. UL and cUL Information to Users

The V-Smart shall comply with the Standard for Access Control System Units

for UL294 and with CSA C22.2 No. 205 for the cUL Mark.

4.4. CE Information to Users

The V-Smart shall have the CE mark, for compliance with CISPR22, EN 55022

and EN 50082-1 requirements. For European Union (EU) countries, the V-Smart

shall be compliant with CE under the R&TTE Directive, related to the radio

transceivers that are part of its design. The V-Smart shall be compliant with

this directive if, and only if, the user installs the Bioscrypt specified R&TTE

Installation Kit (Bioscrypt part number 832-00103-00). This filter kit shall be

included with any V-Smart product if it was shipped to a country within the

EU.

The R&TTE Installation Kit shall consist of two filters: a line filter used to minimize

conducted emissions from power supply lead lengths greater than 3 meters

and a DB15 “Pass-Thru” filter used to minimize radiated emissions.

Line Filter: Manufacturer: JMK Filters

Amhearst, New Hampshire

USA, 03031

http://www.JMKFilters.com

Part Number: FF-1586-1