Switch User Manual

20
Manual Documentation Number: EIR505-xx_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Port status
Shows the status of each port
 Port: Displays the port number
 Type: Displays the speed and mode, ex: 100TX = 100Mbps
 Link: Displays the ports status (up or down)
 State: Displays the ports status (disabled or enabled). Unlinked is
displayed as “off ”
 Negotiation: Displays the auto negotiation mode (auto or forced).
 Speed Duplex: Displays the port connection speed. “Config” is the
configured value. “Actual” is the current value.
 Flow Control: Displays the flow control status as “Symmetric” or
“Asymmetric” in full mode. “Disable” means that flow control is not
enabled “Config” indicates that the value is user configured. “Actual” is
the current value of the port.
Port Status interface
Single Port Information
Click the desired port on the Panel figure. The single port information
window will display the current port information.