System information

B&B Electronics, Inc. SPECTRE Configuration Manual
38
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
Interval.
Renegotiate
Interval
Parameter sets the renegotiation period (reauthorization)
for the OpenVPN tunnel. After this time period, the router will re-
establish the tunnel to ensure the continued security of the tunnel.
Max Fragment
Size
Defines maximum packet size.
Compression
none – No compression is used.
LZO – Lossless LZO compression. Compression has to be
selected on both tunnel ends.
NAT Rules
not applied – NAT rules are not applied to OpenVPN tunnel.
applied – NAT rules are not applied to OpenVPN tunnel.
Authenticate Mode
none – is used any authentication mode
Pre-shared secret – enables authentication using pre-shared
secret keys. Both sides of the tunnel must use the same key
Username/password – enables authentication using CA
Certificate, Username and Password
X.509 Certificate (multiclient) – enables authentication by CA
Certificate, Local Certificate and Local Private Key
X.509 Certificate (client) – enables authentication by CA
Certificate, Local Certificate and Local Private Key
X.509 Certificate (server) - enables authentication by CA
Certificate, Local Certificate and Local Private Key
Pre-shared Secret
Authentication using Pre-shared secret keys can be used in all
authentication modes.
CA Certificate
This authentication certificate can be used in authentication mode
Username/password and X.509 certificate.
DH Parameters
DH parameters can be used in authentication mode X.509 server.
Local Certificate
This authentication certificate can be used in authentication mode
X.509 certificate.
Local Private Key
Local private key can be used in authentication mode X.509 certificate.
Username
Authentication using a login name and password authentication can be
used in the Authenticate Mode Username/Password.
Password
Extra Options
Use parameter Extra Options to define additional parameters of the
OpenVPN tunnel, for example DHCP options etc.
Table 27: OpenVPN configuration
Press the Apply button to apply changes.