Owner's manual

Section 3 - Initial Setup and Connections Vlinx VESR4x4 Serial Server
Page 18 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
Note: For more information on how to use Vlinx Manager to configure your serial server, refer to Section 4:
Configuring the Serial Server
Configuring via the Serial Port using Vlinx Manager (Console Mode)
Your serial server can be configured via the serial port using Vlinx Manager. To
use this feature the serial port must be connected to the serial port of a PC
(using a null modem cable).
Figure 11. Console Mode Setup
To configure the serial server it must be put into Console Mode, using the
Reset switch.
Note: Refer to Section 2 for information on how to use the Reset switch to enter Console Mode.
VESP211 Serial Server Operational Connections
VESP211 Serial Servers can operate in Direct IP, Virtual COM Port and Paired
Modes.
In Direct IP Mode applications using TCP/IP or UDP/IP socket programs can
communicate with the COM ports on the serial server. In this type of
application the serial server is configured as a TCP or UDP server. The socket
program running on the PC establishes a communication connection with the
serial server. The data is sent directly to and from the serial port on the
server.