Owner's manual

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 25 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
1. Double-click the row associated with the desired serial server. The Login
page appears.
2. Type the password into the Password box. The password is blank by
default.
Figure 19. Login Page
3. Click Login.
The General Configuration page appears.
Navigating the Configuration Pages
There are two ways to move from page to page in the Vlinx Manager software:
by clicking a specific link, or by clicking Next or Back to move through the
pages sequentially.
Note: Always remember to click Save before leaving a page to ensure your settings are saved.
Setting up the Serial Server Name and Password
On the General Configuration page you can do the following:
 Change the name of the serial server
 Initiate a login password change