Owner's manual

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 26 of 66 Manual Documentation Number: VESP211-5011m
www.bb-elec.com/
www.bb-europe.com/
Figure 20. General Configuration Page
Changing the serial server’s name:
1. Type the new name into the Serial Server Name text box.
2. Click Save.
Changing the password:
1. Select the I want to change the password check box.
Two text boxes appear.
Figure 21. Changing the Password
2. Type the new password into both boxes
3. Click Save.
Setting up IP Addressing
On the Network Configuration page you can configure the serial server to use
dynamic (DHCP) or static IP addressing on the network.