Specifications

Documentation Number: ESP902-2303 Manual Table of Contents iii
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone]
MAC Address..........................................................................23
Link Status (Shown in Telnet or Console mode only) ........23
Server Serial Port (Select 1 or 2)...........................................23
Baud Rate (Set for each port)................................................24
Data/Parity/Stop (Set for each port)......................................24
Flow Control (Set for each port)............................................24
Connection Mode (Set for each port) ...................................24
TCP/UDP Protocol (Set for each port) ..................................24
TCP/UDP Port (Set for each port)..........................................24
Remote IP Address (Set for each port).................................25
Update .....................................................................................25
Chapter 6: INSTALLING VIRTUAL COM PORT...............27
Use Device Manager to View New Ports ..............................29
Chapter 7: REMOVING A VIRTUAL COM PORT .............31
Removing the Virtual COM port with ESP902 Management
Software ..................................................................................31
Removing the Virtual COM Port using Device Manager.....32
Chapter 8: UPGRADE MODE...........................................34
Using Virtual COM or Serial Connections............................34
Chapter 9: CONSOLE MODE SETUP...............................37
APPENDIX A: LOOPBACK CONNECTIONS..................A-1
APPENDIX B: RS-232 CONNECTIONS ..........................B-1
APPENDIX C: RS-422 CONNECTIONS ..........................C-1
APPENDIX D: RS-485 CONNECTIONS ..........................D-1