Data Sheet

DATA SHEET
Technical changes reserved
0141 0316-30 06/2014
Polyethylene sintered lter
12 x 27 mm for humidity probes
DescriptionDescription
Description
Humidity sensors in continuous operation are prone to dust deposits
and contamination. With the help of this high quality sintered lters, the
sensor element can be protected against external effects. The lters are
also suitable for other gas sensors.
The sintered lter of polyethylene with 20 μm pore size are of very ne
grain size and are also short time resistant against water jets (hydro
-
phobic).
Technical Data
• Material: sintered polyethylene
• Pore size 20μm
• Hydrophobic
• Water resistant
• Temperature range –40...+80 °C
• Dimensions 12 x 27 mm
• Inner diameter 6,5 mm
For further information, please visit our website:
www.bb-sensors.com
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 1