Instructions

OPERATION MANUAL
Technical changes reserved
0141 0316-113 25.08.2015
Pressure resistant temperature probe
DS18S20-series with thread M10
DescriptionDescription
Characteristic features
• Probe with threads M10, Ø 7 x 28 mm
• Pressure resistant. 20 bar, with sealing
• High quality TPE cable shielded
• Continuous operating temperature –40...+80 °C
• Sensor in stainless steel protective sleeve (1.4571)
• Splash waterproof
• RJ12 plug connector with breakage protection
• Resolution 0,06 °C
• Accuracy ±0,5 °K nominal (from 0...+85 °C),
as per data sheet of manufacturer
• Scratchpad memory for probe identication
Areas of application
• Pneumatics and hydraulics
• Cold storage devices
• Science and research laboratories
• Industrial temperature logging
Features
The pressure resistant measuring probe can be screwed with a M10-
screw in thread.
This models with seal ring are suitable up to 20 bar.
The models with TPE-cable and stainless steel probe
are chemically
stable and the tube portion of probe can be submerged in liquid, the
stainless steel (1.4571) does not get affected.
owever, in the cable
termination area, the probe should not come into constant contact with
liquid. They are also suitable for measurement in gas medium.
Temperature range
The Dallas temperature sensors are semiconductor sensors. The un-
housed sensors are suitable for temperature measurement in the ran-
ge of -55...+125 °C. These temperature values are the nal Iimits and
operating above these values is not at all recommended, otherwise the
component can get damaged.
Above 60 °C continuous operating temperature, the PVC becomes soft
and can get deformed. At approx. 80 °C, the material becomes plastic
and the insulation gets damaged under pressure.
Technical data
Pressure resistant temperature probe DS18S20 with thread M10
Temperature measuring range -55...+125 °C
Operating range -40...+80 °C
Accuracy ±0,5 °C (-10...+85 °C)
Sensor DS18S20
Probe Stainless steel 1.4571
Length 28 mm; Ø 7 mm,
Thread M10
Cable TPE/Cu/TPE; 3x0,14 mm²
Length 2000 mm
Connection RJ12 connector
CE-conformance 2004/108/EG
EMV-noise emission EN 61000-6-3:2011
EMV-noise withstanding EN 61000-6-1:2007
Artikel Art.-Nr.
Einschraubfühler mit Kabel 2 m 0555 0251
Einschraubfühler mit Kabel 5 m 0555 0251-01
Einschraubfühler mit Kabel 10 m 0555 0251-02
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 2